4. Tray Extension
Pull this fence to prevent paper from falling off.
5. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and
turn the switch on.
6. Paper size dial
Use this dial to specify the paper size. To use a paper size that is not indicated on the paper size dial, set the
dial to " ". If this is the case, set the paper size using the control panel.
7. Paper Tray
Paper is loaded here. For details about the sizes and types of paper that can be used, see page 137
"Loading Paper".
8. Left Cover
Open to access the waste toner bottle. For details, see "Replacing the Waste Toner Bottle", Maintenance and
Specifications.
9. Vents
Prevent overheating.
10. Standard Tray
Copied/printed paper and fax messages are delivered here.
Front and right view
2. Getting Started
28
To Next Page
Loading...
