Notices 145
Static sensitivity notice
This symbol identifies static-sensitive parts. Do not touch the areas near these symbols without first touching a
metal surface in an area away from the symbol.
To prevent damage from electrostatic discharge when performing maintenance tasks such as clearing paper jams
or replacing supplies, touch any exposed metal frame of the printer before accessing or touching interior areas of
the printer even if the symbol is not present.
ENERGY STAR
Any product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with
Environmental Protection Agency (EPA) ENERGY STAR requirements as of the date of manufacture.
Temperature information
Operating temperature and relative humidity
10 to 32.2°C (50 to 90°F) and 8 to 80% RH
-40 to 40°C (-40 to 104°F) and 8 to 80% RH
Maximum wet bulb temperature
2
: 26.7°C (80.1°F)
Non-condensing environment
Printer / cartridge / imaging unit long-term storage
Printer / cartridge / imaging unit short-term shipping
-40 to 43.3°C (-40 to 110°F)
Supplies shelf life is approximately 2 years. This is based on storage in a standard office environment at 22°C (72°F) and
45% humidity.
2
Wet-bulb temperature is determined by the air temperature and the relative humidity.
To Next Page
Loading...
Need help?
General