Special Mode
DFU (Designed for Factory Use)
Do not change this setting.
Economy Color
Print
Tentative Density
Sets the tentative density of each mode.
Text: 100 / 50 / 30 (Default: 100)
Image: 100 / 50 / 30 (Default: 50)
Graphic:100 / 50 / 30 (Default: 30)
Conversion
Mode
Sets the conversion mode for the economy color print.
No: No conversion is executed.
Color Up Mode: Converts into economy color. The image
density is decreased.
B&W Up Mode: Converts into Economy Black and white.
PM Parts Rep
Notice
Sets whether to display the PM parts replacement notice and whether to stop
the engine.
0
At near end: No Notice / Not Stopped
At life end: Notice “Replace Now” / Not Stopped
1
At near end: No Notice / Not Stopped
At life end: No Notice / Not Stopped
2 (default)
At near end: Notice / Not Stopped
At life end: Notice “Replace Now” / Not Stopped
3
At near end: Notice “Replace Soon” / Not Stopped
At life end: Notice “Replace Now” / Stopped
Scan Maintenance
Mono Compression
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
Service Menu
135
To Next Page
Loading...
