Ricoh PE-P4

Init Engine
EEPROM
This clears all counters except "Full Color" and "Black and White" in the total
counter.
When you execute "Init Engine EEPROM", the engine EEPROM is initialized.
Turn the machine power off/on after you change this setting.
Model
DFU (Designed for Factory Use)
Do not change this setting.
Displays only
Displays the current model in a dropdown list.
Brand ID
DFU (Designed for Factory Use)
Do not change this setting.
00* – 7F
Displays the current brand ID number.
Maintenance ID
DFU (Designed for Factory Use)
Do not change this setting.
00* – 7F
Displays the current maintenance ID number.
LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only valid
data can be input.
Input length: 160 bytes
Trans. Belt Adjust
When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This
calibrates the motor speed to match the length of the new transfer belt.
Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine does
not detect "Fusing SC Reset".
Color Registration
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Reset Transfer Unit Resets the transfer unit life counter.
Reset Fuser Unit Resets the fusing unit life counter.
Fuser SC Reset Resets the Fusing related SC.
Reset 2nd Transfer
unit
Resets the 2nd transfer unit (transfer roller) life counter.
5. System Maintenance Reference
134