The firmware update starts.
• When the firmware update starts:
For Printer models: The alert LED starts to light up.
• For MF models: The alert LED starts to light up and machine makes a beep sound.
8. Check the machine’s control panel for messages and the update’s current percentage of
completion.
• Do not turn the main power off from this point until the update procedure is completed.
9. Wait until the update completion message appears on the machine’s control panel.
• When the firmware update is completed:
For Printer models: The alert LED starts flashing.
• For MF models: The alert LED starts flashing and machine makes a beep sound.
10. Click “Close” [A] to close the update tool.
5. System Maintenance Reference
154
To Next Page
Loading...
