Loading Paper
93
6
Orientation-Fixed Paper or Two-Sided Paper
The following describes paper with its orientation and printing surface specified
(letterhead paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead
paper, punched paper, or copied paper) might not print correctly, depending on
how the originals and paper are placed. Select [On] in [Letterhead Setting] under
[Copier / Document Server Features], and then place the original and paper as
shown below. See “Letterhead Setting”, General Settings Guide. When printing
with the printer function, placement orientation is the same.
For printing using the printer function, load paper in the same orientation.
❖ Orig. orientation
❖ Paper orientation
Note
❒ For [System Settings], specify Letterhead as “Paper Type” for the paper tray
you want to use. See “Tray Paper Settings”, General Settings Guide.
Exposure glass ADF
ANS145S
To Next Page
Loading...
Need help?
General
