Unauthorized Copy Control
71
3
Using [Mask type:]
You can embed patterns and text in a document by setting in the printer driver
to prevent unauthorized copying.
❖ Setting [Mask type:] in the printer driver
• Select a pattern from [Mask type:], and then enter text in the [Text:] box.
•You can set only [Text:], but [Mask type:] and [Text:] must be set together.
❖ Printing a document using [Mask type:]
1. The pattern and text you have set
is printed palely.
2. The document is copied, scanned,
or stored in copiers/multifunction
machines.
3. The pattern and text you have set
appear clearly.
Note
❒ Only the RPCS printer driver is supported.
❒ You cannot partially embed patterns and text strings in a document.
❒ To make the embedded pattern clear, set the character size at least 50 pt (pref-
erably 70 to 80 pt) and character angle to between 30 and 40 degrees.
❒ Due to the effects of the settings, the results of copying, scanning, and saving
documents in the document server may vary depending on the machine
model and setting conditions.
❒ Printing with background patterns and text may be slower than normal printing.
❒ For details about setting [Mask type:], see the printer driver Help.
AJL031S
To Next Page
Loading...
Need help?
General
