Other Transmission Features
138
2
Closed Network
If you turn this function on, transmission will only take place if the destination's
Closed Network Code is the same as yours. This function can stop you acciden-
tally sending information to the wrong place.
Important
❒ You need to register a Closed Network Code beforehand in the Facsimile Fea-
tures menu.
❒ This function is not available with Internet Fax.
A Place the original, and then select the scan settings you require.
B Press [TX Mode].
C Select [Option Setting].
D Press [Closed Network] to highlight it.
To cancel a Closed Network transmission, press [Closed Network] again.
E Press [OK] twice.
F Specify the destination, and then press the {Start} key.
Note
❒ You can program one of the Quick Operation keys with operations for this function.
Using the Quick Operation key allows you to omit step
B
and step
C
.
To Next Page
Loading...
Need help?
General
