Supplementary Information
189
5
❖ Staple
• The following types of paper cannot be stapled:
•Postcard
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
•Curled paper
• Paper of low stiffness
• In the following cases, copies will be delivered to the shift tray without stapling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• To specify Left 2, Top 2, or Slant together with 2 Originals or 8 Originals of
Combine 1 Side, or 4 Originals or 16 Originals of Combine 2 Sides: specify
K paper for L orientation originals and specify L paper for K orienta-
tion originals.
• To specify Left 2, Top 2, or Slant together with Double Copies: specify K
paper for L orientation originals and specify L paper for K orientation
originals.
• If a finisher is installed, the mixed sizes function and the auto paper selec-
tion function become available. These functions make it possible to choose
the paper appropriate for stapling from the mixed sizes. Prior to the oper-
ation, you should set on the feed tray the paper of the size to be used. The
following sizes allow the stapling when mixed with other sizes.
•A3L and A4K
•B4 JISL and B5 JISK
•A4L and A5K
• 11" × 17"L and 8
1
/
2
" × 11"K
•8
1
/
2
" × 11"L and 5
1
/
2
" × 8
1
/
2
"K
To Next Page
Loading...
Need help?
General
