8
13. Allows you to set various fea-
tures for transmission.
See “Other Transmission Features”.
14. Allows you to set a sender.
15. Allows you to check the number
of “Transmission Standby File(s)”,
“Memory Lock File(s)”, and “RX
Print Standby File(s)”.
16. Displays Quick Operation keys
set for frequently used functions. [TX
File Status] and [RX File Status] are pre-
set.
17. Title word keys appear. Allows
you to switch from one page (display)
to another on the destination list.
18. Switches the title word keys.
19. Appears on Destination keys
programmed as a group destination.
Note
❒ The display will differ depending on installed optional units.
❒ You can change “Internet Fax Settings” under “Initial Settings” in the Facsim-
ile Features menu.
❒ Information about documents sent using the facsimile function cannot be
checked in [Job List]. Use [Change TX / Info].
❒ To use the Internet Fax or IP-Fax functions, the optional printer/scanner unit
must be installed.
Reference
p.15 “Transmission Modes”
p.77 “Switching the titles in the Address Book”
p.84 “Searching for a Destination in the Address Book”
p.219 “Sending a Stored File”
p.265 “Checking the Memory Status”
“Facsimile Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gener-
al Settings Guide
To Next Page
Loading...
Need help?
General
