Transmission Modes
19
1
F Specify the next destination.
Press [Fax] or [Internet Fax] to switch the transmission type between fax/IP-
Fax and Internet Fax.
A fax number, e-mail address and IP-Fax destination can be specified simul-
taneously.
G Press the {Start} key.
Note
❒ If the combined total number of programmed destinations exceeds the
maximum value, only Immediate Transmission is possible.
❒ For the maximum number of destinations you can specify per file, see
“Maximum Values”.
❒ For the maximum number of destinations you can specify for all files (in-
cluding files in memory), see “Maximum Values”.
❒ For the maximum number of documents you can store in memory for
Memory Transmission, see “Maximum Values”.
❒ For the maximum number of pages you can store in memory (using A4
Standard <ITU-T q1 Chart>), see “Maximum Values”.
Reference
p.47 “Scan Type”
p.49 “Resolution”
p.58 “Density (Contrast)”
p.64 “Sending Over a Fax Line”
p.67 “Sending by IP-Fax”
p.70 “Sending to an E-mail Address”
p.76 “Using the Address Book to Specify Destinations”
p.78 “Specifying Group Destinations”
p.79 “Selecting Destinations from Recent Destinations”
p.276 “Maximum Values”
“Facsimile Features”, General Settings Guide
“Troubleshooting When Using the Facsimile Function”, Troubleshooting
To Next Page
Loading...
Need help?
General
