Transmission
98
1
D When the line is connected and you hear a high-pitched tone, press the
{Start} key.
The transmission starts.
If you want to cancel a transmission, press the {Clear/Stop} key, and then re-
move the originals.
After transmission, the standby display appears.
Note
❒ This function is unavailable in some countries.
❒ Press [Vol...] to display the Adjust Sound Volume screen, and then press
[Louder] or [Lower] to adjust the volume of the on-hook sound. The volume
can also be preprogrammed in the Facsimile Features menu.
❒ If you have an external telephone on the fax machine, you can speak with
the other party when you hear a voice. If you hear a voice before pressing
the {Start} key, pick up the external telephone and tell the receiver you
want to send a fax document (ask them to switch to facsimile mode).
❒ For details about On Hook Mode Release Time, see “Facsimile Features”,
General Settings Guide.
Reference
p.76 “Using the Address Book to Specify Destinations”
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
