Ricoh Printer - Information Messages During Networking

Specifying custom size paper for Tray 1 and the optional paper feed unit
• When printing on custom size paper, specify the paper size using the control panel and printer driver.
• When printing with a printer driver other than the RPCS printer driver, you must configure the settings
using control panel.
• The following is the range of paper sizes that can be loaded in each type of the paper trays:
• Tray 1: 139.7 - 216 mm (5.5 - 8.5 in.) in width and 139.7 - 356 mm (5.5 - 14.01 in.) in length.
• Optional Paper Feed Unit (Tray 2, Tray 3): 139.7 - 216 mm (5.5 - 8.5 in.) in width and 160 -
356 mm (6.3 - 14.01 in.) in length.
• The printer cannot print from applications that do not support custom size paper.
1. Press the [Menu] key.
BMU098S
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Paper Input], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [Tray Paper Size], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to display the target paper tray, and then press the [ Enter] key.
5. Press the [ ] or [ ] key to display [Custom Size], and then press the [ Enter] key.
6. Press the [ ] or [ ] key to set horizontal value, and then press the [ Enter] key.
Loading Paper
103
5