Ricoh Printer - Output Tray

UNIX Configuration
28
1
The following sample shows how to print using recycled paper (host name:
nphost, file name: file1):
•rsh
% rsh nphost print mediatype=recycled < file1
•rcp
% rcp file1 nphost:mediatype=recycled
•ftp
% ftp> put file1 mediatype=recycled
Note
❒ The value or actions that can be selected differ depending on the model you
are using. For details about available paper type, see the manual that comes
with this printer.
Output Tray
Select the output tray.
outbin=value of output tray
Important
❒ Only installed output trays are available.
Reference
For details about available output tray, see the manual that comes with this
machine.
The following sample shows how to print to the standard tray (standard tray:
upper, host name: nphost, file name: file1):
•rsh
% rsh nphost print outbin=upper < file1
•rcp
% rcp file1 nphost:outbin=upper
•ftp
ftp> put file1 outbin=upper
Note
❒ The value or actions that can be selected differ depending on the model you
are using. For details about available output tray, see the manual that comes
with this printer.
Value
upper, finishershift, finisherploof, finisherbooklet, sequentialstack, optionaloutputbin1,
optionaloutputbin2, optionaloutputbin3, optionaloutputbin4