Specifying the Device Option
31
1
Binding
Select the binding direction for duplex printing.
Important
❒ The duplex unit is required.
binding=value of binding
The following sample shows how to set duplex printing and long-edge binding
(host name: nphost, file name: file1):
•rsh
% rsh nphost print duplex=on,binding=longedge < file1
•rcp
% rcp file1 nphost:duplex=on,binding=longedge
•ftp
ftp> put file1 duplex=on,binding=longedge
Note
❒ Before selecting the binding option, the duplex option must be set to on.
❒ Data and paper volume affect completion of the print job.
❒ The value or actions that can be selected differ depending on the model you
are using. For details about binding direction for duplex printing, see the
manual that comes with this printer.
Binding direction Value
Longedge longedge
Shortedge shortedge
Left left
Right right
Top top
To Next Page
Loading...
