Ricoh Printer - Maintenance Menu; Changing the Maintenance Menu

Maintenance Menu
You can set printing conditions such as density and calibration, and printer management such as formatting
the optional hard disk unit.
Changing the Maintenance Menu
This section explains changing the Maintenance menu using examples.
HD Format
Follow the procedure below to format the hard disk drive.
1. Press the [Menu] key.
BMU098S
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [HD Format], and then press the [ Enter] key.
Maintenance Menu
145
4