Ricoh Printer - Host Interface Menu; Changing the Host Interface Menu

Host Interface Menu
You can set configurations about network connections and communication when using parallel connection
between the printer and the computer. The changed configuration holds even if the printer is turned off.
Changing the Host Interface Menu
Follow the procedure below to change the [I/O Timeout].
1. Press the [Menu] key.
BMU098S
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [I/O Timeout], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to select the lead time needed to end a printing operation, and then
press the [ Enter] key.
4. Making Printer Settings Using the Control Panel
158
4