• On
• Default: Off
RAM Disk
If the optional hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher.
This menu appears only when the optional hard disk is not installed.
• 0 MB
• 2 MB
• 4 MB
• 8 MB
• 16 MB
• Default: 4 MB
• When the amount of SDRAM is small and RAM Disk is set to 16 MB, printing may not be possible
depending on the print job and duplex printing may be canceled. If this happens, increase the
amount of SDRAM, or set RAM Disk to 8 MB or less.
• For details about the optional SDRAM module, see "Installing the Memory Expansion Units",
Hardware Guide.
Auto Email Ntfy
You can specify whether or not to send an error message to a preset e-mail address when an error
occurs in the printer.
• On
• Off
• Default: On
• After changing the setting, turn off the power of the printer briefly, and then turn it on again.
System Menu
157
To Next Page
Loading...
