Ricoh Printer - When Remove Misfeed Paper Exit Cover Appears; Removing Misfed Paper from the Internal Path

When "Remove Misfeed Paper Exit Cover"
Appears
• Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer.
This might cause a misfeed and damage the printer.
• Be sure to put the toner cartridge on a stable, flat surface.
• Do not hold the toner cartridge upside down or stand it vertically.
• If paper is fed from the Bypass Tray, be sure to remove all the paper from the Bypass Tray and close
it before opening the front cover.
Removing Misfed Paper from the Internal Path
1. Open the front cover by pushing the front cover release button.
BMU012S
2. Lift the front side of the toner cartridge, and then pull it out of the printer.
BMU013S
When "Remove Misfeed Paper Exit Cover" Appears
189
10