Ricoh Printer - Replacing the Fusing Unit

10. When the optional duplex unit was removed, push in the duplex unit along the rails in the
back of the printer.
BMU035S
11. Securely push the duplex unit into the printer.
BMU036S
• If the printer is equipped with the optional paper feed unit, do not move the printer and the unit together,
because they are not securely attached.
• p.203 "Moving and Transporting the Printer"
Replacing the Fusing Unit
• The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and
wait at least an hour before replacing the old fusing unit. Not allowing the unit to cool may
result in burns.
6. Replacing Consumables and Maintenance Kit
138
6