3. Press the [ ] or [ ] key to display [Print All Files], and then press the [ Enter] key.
The user ID when the job was stored appears.
4. Press the [ ] or [ ] key to display the user ID for the file you want to print, and then press
the [ Enter] key.
5. The number of documents selected for printing is displayed. Check the number, and if it is
correct, press the [ Enter] key.
6. Enter the number of sets you want to print using the [ ] or [ ] keys, and then press the [
Enter] key.
You can enter up to 999 sets.
7. Press the [Escape] key 1-4 times.
The initial screen appears.
• When multiple files are selected without setting a quantity, one set less than the minimum number of
all settings is applied. If the least number of settings is one set, all selected files will be printed at one
set.
3. Printing Stored Documents
100
To Next Page
Loading...
