• Default: High Speed
Select Status
Specify the signal status.
• High
• Low
• Default: High
Input Prime
Specify whether to enable or disable Input Prime.
• Active
• Not Active
• Default: Not Active
Bidirect. Comm.
Specify whether to enable or disable bidirectional communication.
• Yes
• No
• Default: Yes
Wireless LAN
You can make settings for Wireless LAN. This menu appears only when the optional Wireless LAN
interface unit is installed.
Comm. Mode
You can select the transmission mode for Wireless LAN.
• 802.11 Ad hoc
• Infrastructure
• Default: Infrastructure
• Comm. Mode can also be set using a Web Image Monitor. For details, see Web Image
Monitor Help.
Ad-hoc Channel
You can select channels:
Host Interface Menu
163
To Next Page
Loading...
