Ricoh Printer - Page 620

ftp
Use the "put" or "mput" command according to the number of files to be printed.
When one file is printed
ftp> put \pass name\file name [option]
When multiple files are printed
ftp> mput \pass name\file name [\pass name\file name...] [option]
1. Formulate the printer's IP address or the host name of the hosts file printer as an argument
and use the "ftp" command.
% ftp printer's IP address
2. Enter the user name and password, and then press the [ Enter] key.
For details about the user name and password, consult your administrator.
User:
Password:
3. When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
4. Specify files to be printed.
The following shows the examples of printing a PS file named "file 1" in the "C:\PRINT" directory and
printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2
5. Quit ftp.
ftp> bye
• "=", ",", "_", and ";"cannot be used for filenames. File names will be read as option strings.
• For "mput" command, option can not be defined.
• For "mput" command, "*" and "?" can be used as wild cards in file names.
• When printing a binary file in ASCII mode, print may not come out correctly.
9. Appendix
382
9