Ricoh Printer - Page 66

4. Carefully insert the optional card into the upper slot, until the card clicks into the place.
BMU030S
5. Reattach the cover over the optional card. Fasten the screw to secure the cover.
BMU031S
• Do not touch the card while the printer is in use. It may come loose, even if pushed only slightly. The
slot cover must be reattached.
• Confirm that the card was correctly installed by printing the configuration page.
• If the card is not installed properly, repeat the procedure from the beginning. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For details about printing the configuration page, see "Printing the Test Page", Quick Installation
Guide.
2. Installing Options
48
2