6
❖ Log Transfer
You can turn off the log transfer function. The default is off.
Note
❒ Optional software is required for this function.
❖ @Remote Service
You can prohibit the communication with @Remote Service.
•Prohibit
• Do not prohibit
Note
❒ Default: Do not prohibit
Host Interface menu parameters (administrator menu)
❖ USB Speed
You can specify the USB communication speed.
• Full Speed
You can set the communication speed of USB to USB1.1.
•Auto Select
Note
❒ Default: Auto Select
❒ The settings you apply here take effect on the USB interface that comes
with an optional Gigabit Ethernet unit.
To Next Page
Loading...
