Ricoh Pro C7500 - Page 142

Part Names and Functions of the Media Identification Unit
1 2 3
4
DFZ012
1. Power lamp
Lights up when a USB cable is connected and the Media Identification Unit is ready to start scanning paper.
2. Scanning lamp
Lights up when paper is inserted into the scanning area.
After the paper is removed, it flashes while paper is being scanned.
3. Error lamp
Lights up when an error occurs.
4. Paper scanning area
Insert the paper you want to scan here.
Connect the Media Identification Unit
1. Connect the USB cable to the USB host interface on the control panel of the machine.
M0EDIM0202
3. Paper Settings
140