Ricoh Pro C7500 - 1218: Paper Transfer Output; 1222: Paper Transfer Nip Operation Mode

Setting Item Max. Value Min. Value Step Unit
11: Leading Edge: Clear/Special/12:
Leading Edge: White/13: Leading Edge:
Metallic/14: Leading Edge: Option/19:
Trailing Edge: Clear/Special/20: Trailing
Edge: White/21: Trailing Edge:
Metallic/22: Trailing Edge: Option/23:
Trailing Edge: AC: Clear/Special/24:
Trailing Edge: AC: White/25: Trailing
Edge: AC: Metallic/26: Trailing Edge: AC:
Option
10 -10 1 None
15: Leading Edge Len.: Clear/Special/16:
Leading Edge Len.: White/17: Leading
Edge Length: Metallic/18: Leading Edge
Length: Option
30 0 mm
27: Trailing Edge Len.: Clear/Special/28:
Trailing Edge Len.: White/29: Trailing
Edge Length: Metallic/30: Trailing Edge
Length: Option
100
1218: Paper Transfer Output
Specify the Output Mode that matches the paper. Use [Special Paper] when using metallic or other
special paper.
Setting Item Values
01: Output Mode Special Paper
Normal
Textured Paper
1222: Paper Transfer Nip Operation Mode
Adjust shock when paper fed through PTRoller. Higher value (1->4) higher reduction. Leading edge
density may be less. * Low pressure mode can be used only for the job using one paper type.
4. Adjustment Setting Items for a Custom Paper
170