1215: Paper Transfer Output Correction: Paper Edge: Default
BW
Specify the output reference value for secondary transfer on the leading or trailing edge of paper in the
following conditions:
Black & White print
Setting Item Max. Value Min. Value Step Unit
01: Leading Edge: DC Mode/02: Leading
Edge: AC Mode: DC/04: Trailing Edge:
DC Mode/05: Trailing Edge: AC Mode:
DC/06: Trailing Edge: AC Mode: AC
300 5 1 %
03: Pre-Transfer Voltage 12 0 0.1 kV
FC/FCS
Specify the output reference value for secondary transfer on the leading or trailing edge of paper in the
following conditions:
Fill Color print/Full Color print with a special color
Setting Item Max. Value Min. Value Step Unit
07: Leading Edge: DC Mode/08: Leading
Edge: AC Mode: DC/10: Trailing Edge:
DC Mode/11: Trailing Edge: AC Mode:
DC/12: Trailing Edge: AC Mode: AC
300 5 1 %
09: Pre-Transfer Voltage 12 0 0.1 kV
S
Specify the output reference value for secondary transfer on the leading or trailing edge of paper in the
following conditions:
Single-color print in a special color
12: Machine: Image Quality
167
To Next Page
Loading...
