1341: Motor Speed
Speed Adjustment
Adjust the speed of each motor.
Setting Item Max. Value Min. Value Step Unit
01: Transfer Timing Roller/02: Paper
Transfer Belt
3 -3 0.01 %
03: Transfer-Fusing Transfer Belt/07:
Cooling Roller After Fusing/08: Detection
Roller/09: Paper Output Roller
5 -5 0.1
10: Switchback: Entrance Roller/11:
Switchback: Exit Roller
3 -3
04: Fusing Belt: Paper Length: Less than
487.8 mm/05: Fusing Belt: Paper Length:
487.8 - 700.0 mm/06: Fusing Belt: Paper
Length: More than 700.0 mm
10 -10
12: Written Image 0.4 -0.4 0.01
13: Photoconductor Unit: Drum/14:
Intermediate Transfer Belt
1 -1
1351: Interposer
Set the fan operation for Interposer.
Fan Setting
When it is [On], air is blown to the edge of sheets to separate them in close contact.
Setting Item Values
01: Setting Off
On
4. Adjustment Setting Items for a Custom Paper
194
To Next Page
Loading...
