JAM047 (paper scan error)/JAM080 (gap: feed)/JAM097 (skew)/JAM098 (gap: across)/JAM099
(double feed)
Correction for image position gap with across and skew are also turned on/off.
Setting Item Values
01: Detect JAM080/02: Detect/Control
JAM047/097/098/03: Detect JAM099
Off
On
JAM097/098 Detect Threshold
Set the threshold value which determines whether a jam has occurred for JAM097 (skew) and JAM098
(image position gap with across feed).
Setting Item Max. Value Min. Value Step Unit
04: JAM097 10 0 0.1 mm
05: JAM098 7.5 1.6
Paper Edge Detection
Set the illumination level of the image sensor for Image Position Feedback Correction: Gap with Across
Feed and Skew Correction.
• If JAM047 or JAM097 or JAM098 occurs, increase the value by one step.
Setting Item Max. Value Min. Value Step Unit
06: Setting 5 1 1 None
Registration Gate Home Position
Adjust optimum value to increase the accuracy of Skew Correction depending on paper weight. If the
image is highly skewed, adjust the value to [+] direction for thin paper, [-] direction for thick paper.
Setting Item Max. Value Min. Value Step Unit
07: Setting 8 -8 1 None
13: Machine: Paper Feed/Output
193
To Next Page
Loading...
