1. Press the [Media] hub [Custom Paper].
2. Select the check box of the paper to copy, and press [Copy].
3. Press [OK].
4. Select the check box of the paper size to specify, and then press [OK].
To specify all the paper sizes, select the check box of "Size".
When using a paper size that is not in the list, press [Add Size], and add the paper size to use.
5. Enter "Custom Paper Name", and then press [OK].
Change the paper information as required.
• Specify [Glossy] or [Matte] in "Coated Paper" when you are using Coated Paper (Glossy) or
Coated Paper (Matte) including Silk, Dull, Satin Coated, and other types of paper.
The paper is registered as a "Custom Paper".
Registering a Custom Paper with the Media Identification Unit
When you scan paper on the media identification reader, the machine searches for the paper with the
settings that are similar to the paper registered in Master Paper or Custom Paper, and displays it on the
screen.
Registering a Custom Paper
139
To Next Page
Loading...
