High Quality is applied in DFE Setting
Setting Item Max. Value Min. Value Step Unit
02: Press Rlr Temp: Clear/Special/03:
Press Rlr Temp: White04: Heat Roller Temp:
Metallic/05: Heat Roller Temp: Option
200 50 1 Degree C
Pressure Roller Heater
Turns on the pressure heater inside the fusing unit while printing. You can enable it on some types of
media including clear film and label paper. (It is not available for plain paper, coated paper, and other
standard paper.)
Turning on the heater may improve the toner fixation.
Setting Item Values
06: Setting Off
On
1234: Print Mode When Switching Paper Type
Adjust the time to wait before switching paper in a mixed-paper job. Specifying [Productivity Priority]
improves productivity, but may degrade the fusing quality.
Setting Item Values
01: Setting Use Operator Adjustment Settings
Fusing Priority
Standard
Productivity Priority
1235: Fusing Temperature Range
BW/FC/FCS
Under conditions below, set range of fusing start temperature.
B&W/FC/FC with S
HQ is not applied in DFE
12: Machine: Image Quality
179
To Next Page
Loading...
