1225: Paper Transfer Pressure
Adjust for the deviation in pressure when transferring toner onto paper.
Setting Item Max. Value Min. Value Step Unit
01: Operator Side/02: Opposite Side of
Operator
50 -50 1 step
1227: Paper Transfer Roller Reverse Rotation
Adjust the interval to execute smoothing paper transfer cleaning belt. (When the value is set to 0,
smoothing is not executed.) Shorten the interval when using paper with a lot of paper dust.
If the value is set to other than 0, productivity will be reduced.
Setting Item Max. Value Min. Value Step Unit
01: Setting 2,000 0 100 Page
1231: Print Speed
BW/FC/FCS
Under the following conditions, set the print speed.
Black & White Printing/Full Color Printing/Full Color Printing including Special Color
High Quality is not applied in DFE Setting
Setting Item Values
01: BW/FC/FCS High
Middle
Low
FCS
Under the following conditions, set the print speed.
Full Color Printing including Special Color
High Quality is applied in DFE Setting
4. Adjustment Setting Items for a Custom Paper
172
To Next Page
Loading...
