Ricoh Pro C7500 - Page 264

• Check that the LED on
the front right cover of
the perfect binder is
unlit.
• Open the front right
and front left covers of
the perfect binder.
• Raise lever Mk12, and
then remove misfed
paper.
• Return lever Mk12 to
its original position.
• Turn lever Mk13 to the
left.
• Remove misfed paper.
• Lower lever Mk14, and then remove misfed paper.
• Return levers Mk14 and Mk13 to their original positions.
• Close the front left and front right covers of the perfect binder.
CXG015
When N1 is displayed
• Open the folding unit front cover.
• Raise lever N1.
• Remove misfed paper.
• Return lever N1 back to its original
position.
• Close the folding unit front cover.
M0EBIM2360
When N3-N6 is displayed
6. Troubleshooting
262