(3) Other Options
No. Option Description
1 A3/11 × 17 tray unit
You can load paper sizes up to A3 or 11 × 17 in Tray 1
using this unit. If you install the A3/11 × 17 tray unit on your
machine, you cannot use it as a tandem tray.
2
5th station upgrade
kit
You can use the special color.
3
Toner interchange
unit
Exchange the units for the black and special color to print a
layer of white toner under other colors. You can print colors
vividly in a single path even on dark-colored or metallic paper.
4
5th station
replacement unit
You can exchange the special color to be used for another
special color.
5 Interface box Allows you to connect extended options to the machine.
• You cannot install multiple finishers simultaneously.
• If you have connected two high capacity stackers, you cannot install the multi-folding unit or the
perfect binder.
• You can install the multi-folding unit only if either finisher or booklet finisher is installed.
• You can install the perfect binder only if one of the following options is installed: finisher, booklet
finisher, or the high capacity stacker.
• The multi bypass tray (Tray A) can be attached only if the wide LCT is installed. However, you can
attach the multi bypass tray (Tray A) to the wide LCT only if the multi bypass attachment kit is
installed.
• When printing on banner paper on the machine with various banner sheet trays attached, the
printed paper is ejected with the print side facing up. The appropriate setting in the printer driver or
color controller is ignored.
• LCT banner sheet tray and extension LCT banner sheet tray cannot be attached at the same time.
1. Getting Started
28
To Next Page
Loading...
