4. Press [Add] in [Role].
To modify a registered role, select a role, and then press [Edit].
To delete a registered role, select a role, press [Delete], and then press [OK].
5. Specify the functions, printers, and other items to make available for the role.
Configure and register the following items:
• Role name: Specify the name to use for identifying the role. The name cannot be change after
the role is registered.
• Specify a name that is unique on the machine, using up to 30 UTF-8 characters (no
blanks allowed).
• Operation set: Specify an operation set. Select the operation set that comes the closest to the
role as a template of the function to be assigned, and then add or delete the function to
enable in [Functions].
page 46 "Functions Assigned to the Operation Set"
• Functions: Specify the functions to allow usage. Multiple items can be selected simultaneously.
• Printer: Specify the printer to allow usage on the role among the printers registered on the UI
server. Multiple items can be selected simultaneously.
• Default: All registered printers
6. Press [OK].
1. Getting Started
50
To Next Page
Loading...
