Ricoh Pro C751EX - Page 154

5. Select the network security level.
Select [Level 0], [Level 1], or [Level 2].
6. Press [OK].
7. Press [Exit].
8. Press the [User Tools] key.
Specifying Network Security Level Using Web Image Monitor
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
The network administrator can log in.
Enter the login user name and login password.
4. Click [Configuration], and then click [Network Security] under "Security".
5. Select the network security level in "Security Level".
6. Click [OK].
7. Click [OK].
8. Click [Logout].
Status of Functions under Each Network Security Level
Tab Name: TCP/IP
*1
Function Level 0 Level 1 Level 2
TCP/IP
*2
Active Active Active
HTTP> Port 80 Open Open Open
7. Enhanced Network Security
152
7