Function Level 0 Level 1 Level 2
SSL/TLS> Port 443 Open Open Open
SSL/TLS> Permit SSL/TLS Communication Ciphertext
Priority
Ciphertext
Priority
Ciphertext Only
SSL/TLS version>SSL2.0
*2
Active Active Active
SSL/TLS version>SSL3.0
*2
Active Active Active
SSL/TLS version>TLS
*2
Active Active Active
Encryption Strength Setting>AES
*2
Active Active Active
Encryption Strength Setting>3DES
*2
Active Active Active
Encryption Strength Setting>DES
*2
Active Active Active
Encryption Strength Setting>RC4 Active Active Active
Encryption Strength Setting>RC2
*2
Active Active Active
FTP Active Active Active
sftp Active Active Active
ssh Active Active Active
RSH/RCP Active Active Inactive
TELNET Active Inactive Inactive
Bonjour Active Active Inactive
SSDP Active Active Inactive
SMB Active Active Inactive
NetBIOS over TCP/IPv4 Active Active Inactive
WSD (Device) Active Active Inactive
WSD (Scanner) Active Active Inactive
The same settings are applied to IPv4 and IPv6.
Preventing Unauthorized Access
153