7. Make the necessary settings.
For details about the displayed items and selectable items, see Web Image Monitor Help.
8. Click [OK].
9. Click [OK].
If a security warning dialog box appears, read the message, and then click [OK].
"Installed" appears under "Certificate Status" to show that a device certificate for the machine has
been installed.
10. Click [OK].
11. Click [Logout].
• Click [Delete] to delete the device certificate from the machine.
Creating the Device Certificate (Issued by a Certificate Authority)
Create the device certificate using Web Image Monitor.
Use this procedure to create a device certificate issued by a certificate authority.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
The network administrator can log in.
Enter the login user name and login password.
4. Click [Configuration], and then click [Device Certificate] under "Security".
5. Click [Certificate1].
6. Click [Request].
7. Make the necessary settings.
For details about the displayed items and selectable items, see Web Image Monitor Help.
8. Click [OK].
9. Click [OK].
"Requesting" appears under "Certificate Status".
10. Click [OK].
11. Click [Logout].
12. Apply to the certificate authority for the device certificate.
The application procedure depends on the certificate authority. For details, contact the certificate
authority.
Protection Using Encryption
159
To Next Page
Loading...
