Up to 5 realms can be registered.
8. Press [Change] for "Domain Name", enter the name of the domain controller to be
authenticated, and then press [OK].
9. Press [On] for "Use Secure Connection (SSL)".
If this item is not visible, press [ Next] to display more settings.
If you are not using secure sockets layer (SSL) for authentication, press [Off].
If global groups have been registered under Windows server, you can limit the use of functions for
each global group.
You need to create global groups in the Windows server in advance and register in each group the
users to be authenticated. You also need to register in the machine the functions available to the global
group members. Create global groups in the machine by entering the names of the global groups
registered in the Windows Server. (Keep in mind that group names are case sensitive.) Then specify
the machine functions available to each group.
If global groups are not specified, users can use the available functions specified in [*Default Group].
If global groups are specified, users not registered in global groups can use the available functions
specified in [*Default Group]. By default, all functions are available to *Default Group members.
Specify the limitation on available functions according to user needs.
Windows Authentication
49
To Next Page
Loading...
