10. Under "Group", press [Program / Change], and then press [* Not Programmed].
If this item is not visible, press [ Next] to display more settings.
11. Under "Group Name", press [Change], and then enter the group name.
12. Press [OK].
13. Select which of the machine's functions you want to permit.
Windows authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see p.122 "Limiting
Available Functions".
14. Press [OK].
15. Press [OK].
3. Configuring User Authentication
50
To Next Page
Loading...
