To use the lockout function for user authentication, the authentication method must be set to basic
authentication. Under other authentication methods, the lockout function protects supervisor and
administrator accounts only, not general user accounts.
Lockout setting items
The lockout function settings can be made using Web Image Monitor.
Setting Item Description Setting Values Default Setting
Lockout
Specify whether or not
to enable the lockout
function.
• Active
• Inactive
• Inactive
Number of Attempts
before Lockout
Specify the number of
authentication
attempts to allow
before applying
lockout.
1-10 5
Lockout Release Timer
Specify whether or not
to cancel lockout after
a specified period
elapses.
• Active
• Inactive
• Inactive
Lock Out User for
Specify the number of
minutes after which
lockout is canceled.
1-9999 min. 60 min.
Lockout release privileges
Administrators with unlocking privileges are as follows.
Locked out User Unlocking administrator
general user user administrator
user administrator, network administrator,
file administrator, machine administrator
supervisor
supervisor machine administrator
Specifying the User Lockout Function
This can be specified by the machine administrator using Web Image Monitor.
1. Open a Web browser.
If User Authentication is Specified
69
To Next Page
Loading...
