Ricoh Pro C9500 - Page 241

• Raise the interposer
unit.
• Open the upper left
cover (Mk3).
• Raise levers Mk4 and
Mk5.
• Check that the LED on the front right cover of the perfect binder is unlit.
• Remove paper if the display reports a paper jam in Mk7 - Mk14.
• Remove misfed paper. • Remove misfed paper.
• Return levers Mk4
and Mk5 to their
original positions.
• Return the upper left
cover (Mk3) and
interposer unit to their
original positions.
CXG011
When Mk6 is displayed
• Open the front cover of the bridge unit (to the right of the perfect binder).
• Raise lever Mk6, and then remove misfed paper.
• Return lever Mk6 to its original position.
• Close the front cover of the bridge unit.
CXG012
When Mk7 or Mk8 is displayed
When Paper Is Jammed
239