• Jammed paper is still inside the high capacity stacker.
Removing paper
• Use the stacker cart for transporting paper from the high capacity stacker. Do not use the
stacker cart for any other purpose.
• Do not attempt to get inside the high capacity stacker.
• The paper press might leave a mark on the top of the paper stack. To prevent this, put several
sheets of unwanted paper or a protective sheet between the paper press and the paper stack.
1. Open the cover of the stacker control panel, and then press the lower tray button.
To stop the lowering stacker tray, press the lower tray button again.
To resume lowering the tray, open and close the stacker front cover, and then press the lower
tray button again after the tray has risen completely.
When the stacker tray is fully lowered, the tray moving indicator stops flashing and remains lit.
2. Open the stacker front cover.
Special Notes When Using External Options
37
To Next Page
Loading...
