• Remote Diagnostics
Displays the e-mail sending screen for requesting remote management service.
It is displayed only when the remote management service is installed, and user calls are enabled.
9. User Name display
Displays the user name. Press this to log in or log out from the machine, change the password, or select the
language to use.
10. (Settings)
You can configure the items displayed on the control panel, specify the machine behavior, create, or edit the
timer, configure the network, and specify other system-wide settings of the machine.
page 67 "Screen Configuration of the [Settings] Hub"
11. (Fiery Settings)
*
The Fiery Settings hub displays the setting items of the Fiery controller that is connected to the machine.
page 65 "Using the Fiery Settings Hub"
12. Switch Hub
Press this to switch the screen that is displayed under the navigation bar.
* This item is displayed on the control panel of the machine only.
1. Getting Started
56
To Next Page
Loading...
