Check that the paper retainer is extended when you load paper of 220 g/m2 (55 lb. Bond) or
lower. Push on the lever on the fence to extend the paper retainer.
1. Paper retainer
Check that the paper retainer is retracted when you load paper of 220.1 g/m2 (55 lb. Bond) or
higher.
5. Adjust the fences to match the paper width.
Check the size indicator to see if the paper is loaded correctly all the way to the back of the paper
source tray.
1. Fence
Loading Paper into the Paper Tray
81
To Next Page
Loading...
