1. Paper retainer
Check that the paper retainer is retracted when you load paper of 220.1 g/m2 (55 lb. Bond) or
higher.
7. Pinch and adjust the fences to match the size of the paper.
8. Add paper as required.
9. Attach the two auxiliary fences and one fence.
Make sure to keep the height of the paper stack below 50 mm (2.0 inches). When feeding paper
that is 487.8– 960.0 mm (19.2–37.8 inches) long, reduce the height of the stack to 40 mm (1.6
inches) or lower for grain long paper of Paper Weight 8 or grain short paper of Paper Weight 6–
2. Paper Specifications and Adding Paper
86
To Next Page
Loading...
