• When removing print cartridges, be careful not to touch the laser scanning unit under the upper
cover (the position shown by the arrow in the illustration below).
• If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black
toner. Change the color mode setting to Black and White using the machine's driver.
• If black toner runs out, you cannot print in black and white or color until the black print cartridge is
replaced.
Messages on the screen
• Replace the indicated print cartridge when any of the following messages appear on the
screen:
"Replace Toner:" (X)
("X" indicates the toner color)
• Prepare the indicated print cartridge when any of the following messages appear on the
screen:
"Repl Tnr soon:" (X)
("X" indicates the toner color)
6. Maintaining the Machine
128
To Next Page
Loading...
Need help?
General