1. Pull up the lever on the top cover, and then carefully raise the top cover.
2. Carefully lift out the print cartridge vertically, holding its center.
From the rear, the print cartridges are installed in the order of cyan (C), magenta (M), yellow (Y),
and black (K).
• Do not shake the removed print cartridge. Doing so can cause remaining toner to leak.
• Place the old print cartridge on paper or similar material to avoid dirtying your workspace.
• The toner color is indicated by the label on each print cartridge.
3. Take the new print cartridge out of the box, and then take it out of the plastic bag.
Replacing the Print Cartridge
129
To Next Page
Loading...
Need help?
General