Message Explanation Recommended Action
Replace Waste Toner Bottle It is time to replace the waste
toner bottle.
Replace the waste toner bottle
with a new one.
See page 132 "Replacing the
Waste Toner Bottle".
Tnr Set Error: # The indicated print cartridge is
not installed correctly, or not
installed.
Install the indicated print
cartridge correctly.
The error message appears
even though the print cartridge
is installed correctly.
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Fusing Unit Setting Error The fusing unit is not installed or
not installed correctly.
Install the fusing unit correctly.
Waste Tnr Bottle Setting Error The waste toner bottle is not
installed or not installed
correctly.
Install the waste toner bottle
correctly.
If the error message appears
even though the waste toner
bottle is attached correctly,
contact your service
representative.
Service call SCXXX There is a problem with the
printer's controller.
Turn off the main power, and
then turn it on again.
If the error occurs again,
contact your sales or service
representative.
Density Sensor Require
Cleaning
Color registration failed. Clean the toner density sensor.
See page 140 "Cleaning the
Toner Density Sensor".
• The message about intermediate transfer unit, fusing unit, and transfer roller appear only for SP
C262DNw.
7. Troubleshooting
154
To Next Page
Loading...
Need help?
General